Pre-amplifier Inputs Maximum input level 2.5Vrms Input impedance 47k
Ω
Signal/noise ratio 105dB Line level outputs Maximum output level 2.5Vrms Output impedance 120 Optical output (TOSLINK) Sample rate Up to 96kHz, depending on source Amplifier Continuous power output, per channel, 80kHz measurement bandwidth Two channels, 8 Two channels, 4 Distortion, two channels, 4 power, 1kHz 0.011% THD+n Video outputs Composite video 1 x gold plated phono. 1V pk-pk in 75 Component video Interlaced or Progressive 3 gold plated phono sockets. Y 1V pk-pk in 75 0.7V pk-pk in 75 SCART socket with RGB video (where fitted) All 0.7V in 75 stereo audio Auto switching of TV with aspect ratio control HDMI 19-pin HDMI connector Supported video formats are: 720 x 576p, 720 x 480p, 1280 x 720p, 1920 x 1080i, 1366 x 768p audio to 2-channel/96kHz (24-bit). CD/DVD-A/SACD playback Digital-Analogue Conversion CS42528 24-bit/192kHz DAC differential output Frequency response (±0.5dB) 20Hz–20kHz DAB receiver (where fitted) DAC AKM 96kHz 24-bit Delta-Sigma DAC RF tuning range 174–240MHz (Band III) 1452–1490MHz (L-band) Sensitivity (typical) –98dBm (VHF measurement to EN50248) Input impedance 50 Audio data rate (maximum) 256kbits/s MPEG layer II, protection level 3 Number stored services (maximum) 128 FM receiver RF tuning range 87.5–108MHz Sensitivity (typical) 2μV Signal/noise ratio (at 200mV) 58dB Distortion (THD at 200mV) 0.5% AM receiver (where fitted) RF tuning range 522–1611kHz Signal/noise ratio (at 200mV) 40dB Solo Movie 2.1 plays a wide range of disc types, which include: < < < < < and MP4-Nero formatting < decoding, CD-R, and CD-RW < < restrictions apply) < Other disc formats may not play correctly in this player. DVD-R/RW and CD-R/RW discs (Audio CDs and Video CD/Super VCDs) recorded using a DVD recorder, CD recorder or personal computer are not guaranteed to play in the Solo Movie 2.1. Incompatibility may be due to a number of possibilities, including the type of disc used and the recording method. CD- R/RW and DVD-R/RW compatibility < recorded in CD Audio or Video CD/Super VCD format, or as a CD-ROM containing the audio and video file types listed above. Other content may cause the disc not to play, or to create noise/ distortion in the output. < recorded using the DVD Video format, or as a DVD-ROM containing the audio and video file types listed above. < < session discs, but plays only sessions that are closed. Unfinalised discs cannot be played. < special characters (.+/=). < ISO 9660 Level 1 or Level 2 compliant. CD physical format: Mode1, Mode2 XA Form 1, or Mode2 Form 2. File names up to 15 characters are supported. < ISO 9660 Level 1 or Level 2 compliant. < directories. Each directory may contain up to 220 files. Compressed audio compatibility The Solo Movie 2.1 will play CD- or DVD-ROM discs containing files saved in the MPEG1 Audio Layer 2 (MP2), MPEG1 Audio Layer 3 (MP3), Windows Media file (WMA) and OGG formats, with sampling rates of 44.1 or 48kHz. Incompatible files will not play correctly, potentially causing noise or distortion on the audio outputs. < files are recommended. Variable bit- rate (VBR) files are playable, but the playing time may not be shown correctly. < with the file extensions ‘.mp3’, ‘.wma’, ‘.mp2’ and ‘.ogg’ (names are not case-sensitive). < available to encode your audio files. Those supported by this player are: For MP2, MP3 and OGG playback The following constant bit rates are supported: 32, 64, 80, 96, 112, 128, 160, 192, 256 and 320 kilobits per second. Variable bit rate (VBR) between 96kb/s and 320kb/s is also supported. For WMA playback The following constant bit rates are supported: 48, 64, 80, 96, 128, 160 and 192kb/s. Note that MP3 audio encoded at 128 kbps or higher should sound close to regular CD Audio quality. This player will play lower bit- rate MP3 or WMA tracks